| System |
| Configuration |
Split-box: IDU, RF Unit |
| Modulation |
DSSS; QPSK |
| Frequency Stability |
±10 ppm |
| RF Attenuation Range |
≥20 dB |
| Maximum Receive Signal |
-20 dBm error free; 0 dBm no damage |
| Error Floor |
‹10-11 |
| Latency (T1)2, one-way |
325 µsec ±10% |
| Error Correction |
Reed-Solomon |
| Security |
12 character Link ID (48 bits) |
| Regulatory Compliance |
FCC Part 15.247; IC RS210 |
| FCC ID |
HZB-S58-GX1 |
| FCC Emmisions Designator |
9M6G7D (4T); 13M4G7D (8T); 28M1G7D (16T) |
| Industry Canada ID |
1856A-U5358GX1 |
| Reliability |
NEBS Level 3 ready |
| Digital Line Interfaces |
| DSX-1 (4, 8 or 16 each) |
| Connector |
RJ-48C modular jack |
| Line Code |
AMI or B8ZS, selectable |
| Line Buildout |
0-655 ft. selectable |
| Loopback |
Local, Far End, Internal Signal |
| Compliance |
ANSI-1987-102-T1 3 |
| Auxiliary Interfaces |
|---|
| Orderwire (DTMF) |
RJ-11, 100 addresses |
| VF |
8 pin modular jack, 4-wire |
|
0dBm @ 600 ohm, balanced |
| Aux Data (serial) |
8 pin modular jack, EIA-561 |
|
≤19.2kbps, selectable, DCE |
| Fault Interfaces |
| Network Management |
SNMP v2c (MIB II, Proxim enterprise MIBs), embedded HTML server, Telnet, VT-100 terminal |
| Far End Management |
Via NMS (embedded router, gateway address, subnet mask), front panel display |
| Interfaces |
| NMS 1 |
10/100BaseT, RJ-45, auto-sense |
| NMS 2 |
10/100BaseT, RJ-45, auto-sense |
| External Alarm Interface |
| Connector |
9-pin Sub-D female |
| Outputs |
2 Form C Relays (Major, Minor) |
| Inputs |
2 TTL with internal pull-ups |
| Power Environment |
| Input Voltage Range |
-20 to -60 Vdc or
+20 to +60 Vdc |
| Power Consumption |
‹70 Watts |
| Power Connector |
3-pin terminal block |
| Operating Temperature |
| IDU |
0°C to +50°C |
| RF Unit |
-30°C to +55°C |
| Humidity |
| IDU |
95%, non-condensing |
| RF Unit |
100%, condensing |
| Altitude |
up to 15,000 ft/5000 m |
| Wind Loading (RF Unit) |
up to 110 mph/96 kts |
| MTBF |
>100,000 hours (each IDU and RF Unit) |
| Physical Dimensions |
|
IDU |
RF Unit |
| Size (in/cm) |
17.2 X 10.9 X 1.72 / 43.6 X 27.6 X 4.4 |
14.1 X 10.9 X 1.72 / 35.8 X 27.6 X 4.4 |
| Weight (lbs/kg) |
6.5/2.9 |
12.0/5.4 |
| Mechanical |
| RF Unit |
Antenna Port(outdoor RF cable not provided) |
Type-N female |
|
IDU Port |
TNC female |
|
Cable to IDU |
LMR-240 or equiv. ‹100mLMR-400 or equiv. ‹200mLMR-600 or equiv. ‹300m |
| Mounting |
IDU |
EIA rackmount, 19" or 23", 1RU |
|
RF Unit |
EIA rackmount, 19"or 23", 1RU, or outdoor pole mount bracket (optional) |
| Selectable Frequency Channel Pairs |
| 4xT1 5.8 GHz |
A1: 5731.5 MHz, A2: 5816.5 MHz, B1: 5745 MHz, B2: 5830 MHz, C1: 5758.5 MHz, C2: 5843.5 MHz |
| 8xT1 5.8 GHz |
A1: 5734 MHz, A2: 5819 MHz, B1: 5756 MHz, B2: 5841 MHz |
| 16xT1 5.8 GHz |
A1: 5745 MHz, A2: 5830 MHz |
| Ordering Information |
|
Order Number |
Product Description |
| Lynx.GX 4T |
62291 |
Low Band Terminal, 301-51850-10L0 |
|
62292 |
High Band Terminal, 301-51850-10H0 |
| Lynx.GX 8T |
62139 |
Low Band Terminal, 301-51145-10L0 |
|
62142 |
High Band Terminal, 301-51145-10H0 |
| Lynx.GX 16T |
62284 |
Low Band Terminal, 301-52290-10L0 |
|
62286 |
High Band Terminal, 301-52290-10H0 |
|
ACC-GX-RF-2 |
Optional RF Unit Outdoor Mounting Kit |
|
201-31075-1 |
Optional AC Adapter 110/220 VAC with cable and connector |
|
Call for details |
ServPak 24x7 Enhanced Service and Support contracts (1yr-3yr) |
| Shipping Configuration |
| Lynx.GX 4T, 8T, or 16T IDU (Indoor Unit) |
| Lynx.GX Low Band or High Band RF Unit |
| ACC-GX-IF-1 IDU Mounting Kit |
| ACC-GX-RF-1 RF Unit Indoor Mounting Kit |
| 12" IDU to RF Unit cable |
| Quick Install Guide |
| User Documentation on CD-ROM |
